Gates made for Inner North London openings
A new gate in Camden, Islington or Hackney needs room to open as well as an attractive front face. Capital Fencing Ltd supplies and fits wooden and metal gates, from pedestrian entrances to double leaves where a property has vehicle access. We assess the opening, supporting posts and nearby steps together.
Start with movement, not just width
At Georgian and Victorian terraces, a gate may sit between masonry piers that are neither parallel nor upright. Measuring only the narrowest gap misses the space needed for hinges and the latch. A gate beside basement steps also needs a safe standing position from which someone can release it.
Small rear gardens benefit from a planned swing that avoids bins, planters and doors. Where a passage serves several flats or a mansion block, establish who uses it and whether there are access requirements before selecting the fastening. A gate should not obstruct a shared escape route.
Timber, metal and the street setting
Softwood, hardwood including iroko, and metal offer different appearances and maintenance needs. Solid timber can screen a rear entrance, while an open metal leaf allows views through a front boundary. Made-to-measure construction is useful where the opening has an unusual width or must align with existing railings.
Many streets across these boroughs are conservation areas. Check the council’s requirements before replacing a visible entrance, particularly beside listed railings or a listed house. General fence and gate rules commonly allow heights up to 2 metres, or 1 metre beside a highway used by vehicles, including its pavement. Local restrictions can override those allowances.
Supports must suit the leaf
A heavy hardwood leaf puts substantial load on its hinges and hanging post. Old brick piers need assessment rather than an assumption that extra fixings will hold. On clay soils, seasonal ground changes may move supports; rubble-filled borders and nearby drains can also constrain the post position.
Wind exposure affects both everyday handling and structural loading. A solid gate facing a gap between buildings can catch gusts even on an enclosed street. The proposed leaf size, hinges, stop and latch should work as a set, with sufficient clearance above paving throughout the swing.
What an estimate needs to include
Cost varies with material, leaf dimensions, single or double configuration, hardware and the supporting structure. Removing old posts or forming suitable foundations changes the scope. Decorative details and matching adjacent fencing also affect the work, so distinguish essential requirements from appearance preferences at the enquiry stage.
Please provide views of both sides, opening measurements and your postcode for Petru to review. An initial estimate is written; a free confirmation visit follows when you are ready, and the quote is agreed before work begins. Mention controlled parking zones and delivery restrictions. Traffic congestion and a through-house route at homes without side access can influence the handling plan.
Gate installation locations
Our gate coverage takes in Barnsbury, Canonbury and Highbury, then Holloway and Archway. It also includes De Beauvoir, Dalston, Stoke Newington, Clapton, Homerton and London Fields. On the Camden side, enquiries are welcome from Primrose Hill, Gospel Oak, Kentish Town, West Hampstead and Hampstead.
Questions
Can a gate open out across the pavement?
Plan to contain the movement within your property rather than letting a leaf obstruct pedestrians. Restricted front gardens may require a different layout. Check the arrangement with the council where highway access is involved.
Will a double gate work on sloping paving?
Possibly, but the full travel of each leaf needs checking against the rise. Excessive clearance beneath the closed gate may be undesirable, so the level change can determine the design.
Can a timber gate be fitted beside existing metal railings?
It can be considered if there is a suitable independent support and room for the hardware. The connection should not transfer the gate’s weight to lightweight or fragile railing sections.
Get My Free Quote — 24h Response
No callout fee · Photos first, written estimate · Friendly local team covering London & Hertfordshire.
Pay by debit or credit card, bank transfer or cash once the work and price are agreed. No deposit taken online.

