Security Palisade for Bushey Yards, Depots and Compounds
Steel palisade for yards, depots and compounds, where the boundary is there to be difficult to get through.
Palisade is bought by people with a risk register, not people with a garden. Profiled steel pales bolted to horizontal rails, triple pointed heads, no footholds, and nothing about it apologising for what it is.
It is specified where the boundary is the security measure: builders compounds, plant yards, depots, storage sites, substations and the rear of commercial units where the vulnerable point is a fence line nobody can see from the road.
The parts of a palisade line that fail are almost never the pales. They are the fixings, the rail ends and the gate. That is where we spend the specification effort and where a cheap line is cheap.
Local notes for Bushey
Access is the constraint here more often than the fence is. Long pales and posts arrive off A411 / A4140 with M1 J5 / A41 behind it, and on a working site we phase the line so the compound is closed every night, not just at the end of the job.
Bushey Heath conservation area limits front boundary heights and prohibits certain panel styles, which changes foundation depth on a tall line before it changes anything else. On a 2400mm palisade run the post hole is the specification.
Palisade demand around Bushey sits with Bushey Hall Road rather than the residential streets. Those are the boundaries where a fence line is the only thing between a yard full of plant and a quiet Sunday morning.
Before you buy, the usual questions
- Can you fit a palisade gate wide enough for lorries?
- Yes. Wide vehicle openings are made as double leaves or, where there is room to run, as a sliding gate. The constraint is usually the ground and the swing space, so we measure the swept path before we quote a leaf size.
- Is palisade suitable for a house?
- Almost never. It is an industrial product, it reads as one, and there is usually a better answer for a home. We would rather talk you into vertical bar or a properly built timber line than fit something you will dislike.
- Does palisade need painting?
- Not if it is hot dip galvanised. Colour is optional powder coat on top. What does need attention is the ironmongery on the gates, which we check as part of any maintenance visit.
- How high should palisade fencing be?
- 1800mm is the practical minimum for anything security related, 2400mm is the common depot height, and 3000mm gets specified where the insurer or the risk assessment asks for it. Height alone is not security, so the fixings and the gate matter just as much.
- Can palisade pales be unbolted from outside?
- On a cheap line, yes, and that is exactly how sites get entered without a single cut. We use security fixings so the pales cannot be removed from the public face with a spanner.
- Is access a problem for palisade fencing around WD23?
- It is planned rather than discovered. Deliveries come in off A411 / A4140, and where a street near Bushey (Overground) is tight we arrange the offload and the carry before the start date so nobody spends the morning blocking a road.
Specification at a glance
- Typical height
- 1800mm to 3000mm depending on the risk
- Pale profile
- W or D section pales, triple pointed or round head
- Fixings
- Security fixings so pales cannot simply be unbolted from the outside
- Rails
- Two or three rails by height, with rail ends fixed into the post rather than surface bolted
- Finish
- Hot dip galvanised, powder coated where the client wants a colour
Galvanised is standard on palisade and colour is the exception. Where a site sits next to housing, a dark powder coat over the galvanising takes a good deal of the hostility out of the line without weakening it.
Who buys this and why
- Yards, depots, compounds and storage sites
- The unseen rear boundaries of commercial units
- Plant and machinery storage where theft risk is real and insurers ask questions
- Sites where an existing timber or mesh line has already been breached
Palisade is close to always the wrong product for a home. It looks industrial because it is industrial, most residential planning contexts will not welcome it, and the neighbours will remember it longer than you will. For a domestic boundary that needs to be secure, we specify vertical bar or a closeboard line with a proper post system instead.



From visit to handover
1. Risk walk
We walk the boundary looking for the weak point rather than measuring the easy bit: the low wall, the bin store, the gate that has been forced before.
2. Foundations and posts
Posts concreted deep enough for the height, because a three metre line is a lever and a shallow foundation is where it gives.
3. Gates and closures
Gate frames made heavier than the fence, hung on commercial hinges, with the locking arrangement agreed in writing before fabrication.
Been breached already?
We will walk the line with you and quote the weak point first, which is often a gate or a low section rather than the whole boundary. Call 07885907880 for a free site visit.
Related metal work: Galvanising and powder coating, Side and pedestrian gates, Railings and estate fencing. Main hub: metal fencing and gates.
Nearby: Palisade fencing in Watford, Palisade fencing in Borehamwood, Palisade fencing in Edgware.
Get My Free Quote — 24h Response
No callout fee · Free site visit · Friendly local team covering London & Hertfordshire.
Pay by debit or credit card, bank transfer or cash once the work and price are agreed. No deposit taken online.
