Security Palisade for Haringey Yards, Depots and Compounds
Steel palisade for yards, depots and compounds, where the boundary is there to be difficult to get through.
Palisade is bought by people with a risk register, not people with a garden. Profiled steel pales bolted to horizontal rails, triple pointed heads, no footholds, and nothing about it apologising for what it is.
It is specified where the boundary is the security measure: builders compounds, plant yards, depots, storage sites, substations and the rear of commercial units where the vulnerable point is a fence line nobody can see from the road.
The parts of a palisade line that fail are almost never the pales. They are the fixings, the rail ends and the gate. That is where we spend the specification effort and where a cheap line is cheap.
When we recommend it
- Yards, depots, compounds and storage sites
- The unseen rear boundaries of commercial units
- Plant and machinery storage where theft risk is real and insurers ask questions
- Sites where an existing timber or mesh line has already been breached
Palisade is close to always the wrong product for a home. It looks industrial because it is industrial, most residential planning contexts will not welcome it, and the neighbours will remember it longer than you will. For a domestic boundary that needs to be secure, we specify vertical bar or a closeboard line with a proper post system instead.
Haringey in practice
Ladder-street back-to-back gardens mean every fence run has two owners and three neighbours to keep informed, which changes foundation depth on a tall line before it changes anything else. On a 2400mm palisade run the post hole is the specification.
Palisade demand around Haringey sits with Wood Green High Road and Green Lanes (Harringay Ladder) and Tottenham High Road rather than the residential streets. Those are the boundaries where a fence line is the only thing between a yard full of plant and a quiet Sunday morning.
Access is the constraint here more often than the fence is. Long pales and posts arrive off A105 Green Lanes / A503 Seven Sisters Road with A406 North Circular (5 min) / M25 J25 (20 min) behind it, and on a working site we phase the line so the compound is closed every night, not just at the end of the job.
What we actually fit
- Typical height
- 1800mm to 3000mm depending on the risk
- Pale profile
- W or D section pales, triple pointed or round head
- Fixings
- Security fixings so pales cannot simply be unbolted from the outside
- Rails
- Two or three rails by height, with rail ends fixed into the post rather than surface bolted
- Finish
- Hot dip galvanised, powder coated where the client wants a colour
Galvanised is standard on palisade and colour is the exception. Where a site sits next to housing, a dark powder coat over the galvanising takes a good deal of the hostility out of the line without weakening it.



The order of work
1. Risk walk
We walk the boundary looking for the weak point rather than measuring the easy bit: the low wall, the bin store, the gate that has been forced before.
2. Foundations and posts
Posts concreted deep enough for the height, because a three metre line is a lever and a shallow foundation is where it gives.
3. Gates and closures
Gate frames made heavier than the fence, hung on commercial hinges, with the locking arrangement agreed in writing before fabrication.
What people ask us
- What is the difference between W and D section pales?
- W section is the deeper, stiffer profile and the usual choice for security work. D section is lighter and used where the line is more about demarcation than resistance.
- Is palisade suitable for a house?
- Almost never. It is an industrial product, it reads as one, and there is usually a better answer for a home. We would rather talk you into vertical bar or a properly built timber line than fit something you will dislike.
- Can you fit a palisade gate wide enough for lorries?
- Yes. Wide vehicle openings are made as double leaves or, where there is room to run, as a sliding gate. The constraint is usually the ground and the swing space, so we measure the swept path before we quote a leaf size.
- Can palisade pales be unbolted from outside?
- On a cheap line, yes, and that is exactly how sites get entered without a single cut. We use security fixings so the pales cannot be removed from the public face with a spanner.
- Does palisade need painting?
- Not if it is hot dip galvanised. Colour is optional powder coat on top. What does need attention is the ironmongery on the gates, which we check as part of any maintenance visit.
- How soon can you look at a job in Haringey?
- Usually within a few days. We are working across Haringey Council most weeks, so a measured visit for palisade fencing rarely needs a long wait. Call 07885907880 and we will give you a date rather than a vague promise.
Palisade for yards and compounds in Haringey
Send the site plan or the boundary length and tell us what has already happened. We price pales, rails, fixings, posts and gates as separate lines so nothing hides in a rate per metre. £5m public liability insurance in place.
Related metal work: Railings and estate fencing, Galvanising and powder coating, Vertical bar fencing. Main hub: metal fencing and gates.
Nearby: Palisade fencing in Hackney, Palisade fencing in Islington, Palisade fencing in Waltham Forest.
Get My Free Quote — 24h Response
No callout fee · Free site visit · Friendly local team covering London & Hertfordshire.
Pay by debit or credit card, bank transfer or cash once the work and price are agreed. No deposit taken online.
