London & Hertfordshire Free Site Visit
Side and pedestrian gates in Hackney

Hackney Side Return and Communal Gates

The gate that gets used forty times a day: side returns, alleys, bin access and communal entrances.

A side gate is the hardest working thing on a boundary. It gets opened with an elbow, kicked shut, leaned on with a bin in one hand, and left swinging in the wind, and it does that several times a day for years.

Which is why the specification is about use rather than looks. Frame stiffness, hinge quality, where the lock sits, whether it self closes, and how the gate behaves when the ground under it moves are the questions that decide whether you are happy with it in five years.

Steel side gates suit alleys and side returns particularly well because the opening is often narrow, damp and awkward, and a timber gate in that position swells, drops and eventually catches on the paving.

How the job runs

  1. 1. Check the opening

    Alley openings are rarely parallel, so both sides are measured top and bottom, and the paving fall under the gate is checked so the leaf clears through its whole swing.

  2. 2. Fix to what is there

    Where there is sound masonry we resin fix, where there is not we concrete a steel post, and where the wall is failing we say so before it becomes our problem and yours.

  3. 3. Ironmongery and closure

    Locks, keeps and self closers fitted and adjusted with the gate hung, then handed over working rather than working once it settles.

The numbers that matter

Typical width
800mm to 1200mm for a side return, wider where bins have to pass
Typical height
1800mm to 2100mm where the gate is also a security point
Infill
Vertical bar, mesh, or solid sheet where the gate needs to screen as well as close
Ironmongery
Galvanised hinges, keyed or thumb turn locks, self closers where a communal gate must not be left open
Posts
Steel posts set in concrete, or fixed to sound masonry with resin anchors

Side gates live in the wettest, least ventilated part of a property, so the galvanising matters more here than anywhere else on the boundary. Any cut edge from a site adjustment is treated before we leave.

Doing this job in Hackney

Many boundaries are shared with three or four neighbours on Victorian back-to-backs — clear ownership marks matter, which is why the post fixing on a side gate here gets decided on the visit. Resin into sound brickwork where the passage has it, concreted steel where it does not.

On blocks and converted houses around E5, E8, E9, N1, N16 we fit self closing communal gates, and we invoice managing agents directly where that is easier than collecting from each flat.

Side returns are the most common gate job we do in Hackney, because Victorian terraces across Stoke Newington and De Beauvoir, plus post-war estates around Homerton and London Fields nearly always have a narrow passage down one side and that passage is how a garden gets entered.

Side Gates and Pedestrian Gates fitted in Hackney, E5 (1)Side Gates and Pedestrian Gates fitted in Hackney, E5 (2)Side Gates and Pedestrian Gates fitted in Hackney, E5 (3)

What it suits

  • Side returns and alleys between houses, where an unsecured passage is the way in
  • Bin stores and refuse access on flats and small blocks
  • Communal entrances that must close behind whoever used them last
  • Rented property where the landlord wants something that survives tenants and years

A side gate on its own does not secure a boundary. If the fence either side of it is a rotten timber run that can be pushed over, the gate is decoration. We will quote the gate and tell you plainly that the fence beside it is the weak point rather than take the easy order.

Questions we get asked

Can a side gate be made to fit an out of square alley?
Yes, and it usually has to be. Openings between houses are rarely parallel, so we measure top and bottom on both sides and make the frame to those figures rather than trimming a stock gate.
Is a landlord responsible for a communal side gate?
In most blocks the gate falls to the freeholder or the managing agent rather than an individual leaseholder, but it depends on the lease. We quote per gate and can invoice a managing agent directly.
Can the gate be solid so people cannot see through?
Yes, a steel frame with sheet infill gives you a solid leaf that will not warp the way a boarded timber gate can in a wet passage.
Will a metal gate rust in a damp side passage?
Not if it is galvanised before it is coated. Side returns are the dampest part of most properties, which is exactly why we do not fit painted bare steel there.
Can you fit a self closing gate for a communal entrance?
Yes. Self closing hinges are the standard answer where a gate must not be left propped, and on communal work they are usually the difference between a boundary that stays secure and one that does not.
Do you cover the whole of Hackney?
Yes, side gates and pedestrian gates across E5, E8, E9, N1, N16 and the surrounding boroughs, including islington, haringey, waltham forest. The site visit and the written quote are free wherever you are in that area.

Gate dropping, catching or not locking?

Often it is a rehang and new galvanised ironmongery rather than a new gate, and we will say so. Call 07885907880 for a free look.

Related metal work: Palisade fencing, Bow top fencing, Weld mesh fencing. Main hub: metal fencing and gates.

Nearby: Side and pedestrian gates in Islington, Side and pedestrian gates in Haringey, Side and pedestrian gates in Waltham Forest.

Get In Touch

Get My Free Quote — 24h Response

No callout fee · Free site visit · Friendly local team covering London & Hertfordshire.

Call us
07885907880
or 02036484746
Email
capital_fencing@yahoo.com
WhatsApp
Message us anytime
Area
London & Hertfordshire
Payment
Card payments accepted

Pay by debit or credit card, bank transfer or cash once the work and price are agreed. No deposit taken online.

Request a Free Quote

We'll get back to you within 24 hours.

Free Site Visit No Callout Fee
Call WhatsAppQuote