A corner plot's extra boundary length is the obvious cost factor, but the more important design issue is sightlines — fencing too close to a junction, and too high, can be treated as a highway safety issue independent of general boundary height rules.
On-site checklist
- Check local sightline height restrictions before designing near the junction
- Plan a staged height if you want more privacy away from the corner
- Match material and finish across both street-facing boundaries
- Factor extra boundary length into your budget from the outset
Sightline rules near junctions
Local authorities typically restrict boundary height near a junction to preserve driver visibility, often to around 600mm–1m within a set distance of the corner, tighter than the general residential boundary height guidance. This varies by council, so we check locally rather than assume a blanket figure.
Extra boundary length and design
Two street-facing sides on a corner plot often justifies a more considered, matched design across both frontages rather than treating the second side as an afterthought — inconsistent fencing on a highly visible corner stands out more than on a mid-terrace.
- Confirm sightline height limits with the local council before finalising a design
- Consider matching material and colour across both street-facing sides
- Corner posts and gate posts on a corner plot often take more wind load — spec accordingly
Privacy vs visibility trade-off
Corner plots are more exposed to passing pedestrian and vehicle sightlines than a standard plot, which pushes many owners toward taller fencing than is actually permitted near the junction itself — a staged approach (lower near the corner, taller further back) is often the workable compromise.
Corner plot boundary needing a sightline-compliant design?
We'll check the local sightline requirement for your junction and design a fence that's both compliant and actually gives you privacy further back.
Common questions
How high can a fence be on a corner plot near a junction?
Often 600mm–1m within a set distance of the junction, but this varies by council — we check the specific local requirement before designing.
Can I have a taller fence further back from the corner?
Yes, a staged height (lower near the junction, standard height further along) is a common and workable compromise.
Does a corner plot cost more to fence than a standard plot?
Usually, simply because there's more total boundary length on a corner plot than a comparable mid-plot property.
Do sightline rules apply to hedges as well as fences?
Yes, most council sightline guidance treats any boundary feature — fence, wall or hedge — the same way near a junction.