Corner Plot Fencing: The Sector-Wide Brief
A corner plot has two road-facing boundaries instead of one, and that changes the brief: highway visibility on one side, privacy on the other, and a single corner post that has to carry loads from both directions.
This is planning-aware work as much as it's joinery — get the sight-line splay wrong and the fence gets a council removal notice, not a compliment.
Corner Plot Fencing by town
Pick your town for local council rules, postcodes and property context.
The two-boundary spec
Front boundary on the visibility splay stays low — typically 900mm picket or bar-and-rail — while the side boundary behind the building line can run full 1.8m closeboard for privacy.
- 900mm painted picket or bar-and-rail on the sight-line splay
- 1.8m closeboard behind the building line
- Upsized corner post carrying loads from both directions
Where the highway rules bite
Highway visibility standards apply at the junction, and carrying full-height closeboard all the way to the pavement corner is the single most common reason councils issue removal notices on corner plots. We check the splay before we quote, not after.
The corner post detail
A standard post takes load from one direction. A corner post on a two-sided run takes load from both, and under-sizing it is why so many corner boundaries lean within a year — we upsize as standard, not as an add-on.
Corner Plot Fencing — frequently asked
How high can a front boundary be on a corner plot?
Typically kept to around 900mm on the visibility splay near the junction — full height is reserved for behind the building line.
Where does the highway sight-line splay actually start?
It varies by junction and road classification — we check this on the site visit rather than assuming a standard distance.
Can two different fence types meet at a corner?
Yes — picket or bar-and-rail on the splay, closeboard behind it, joined at a single upsized corner post.
Do I need council permission for a corner plot boundary?
Sometimes, depending on height and the specific sight-line requirement — we'll flag it if your plot needs a check before we install.
What happens if my corner boundary blocks a driver's view?
Councils can and do issue removal notices for exactly this — it's worth getting the splay checked before building full height right to the corner.
Get your corner plot checked before you build
Send us the plot layout or a couple of photos from the junction and we'll tell you what height and material each boundary can actually take.
Get My Free Quote — 24h Response
No callout fee · Free site visit · Friendly local team covering London & Hertfordshire.