Haringey
Haringey's Gate Repairs Team
Almost every failing gate comes down to one of three things — the hinge side, the frame, or the ironmongery — and fixing the right one avoids paying for a new gate you didn't need.
Get a quote
If you're weighing up gate repairs in Haringey: a drop bolt that no longer locates in its ground socket is often bent slightly from repeated contact rather than broken, and a bent bolt can sometimes be straightened rather than replaced if the bend is caught early. West Green Road, Ferme Park Road Turnpike Lane market Turnpike Lane and Wood Green form the borough's main retail centres. Alexandra Palace sits on high ground overlooking much of the borough, and the slope down from the Palace affects garden gradients on the surrounding streets.
Checking a drop bolt for bend before replacement
A drop bolt that no longer locates in its ground socket is often bent slightly from repeated contact rather than broken, and a bent bolt can sometimes be straightened rather than replaced if the bend is caught early.
Leaving a bent bolt in use accelerates wear on the socket edges as it forces its way in at an angle each time, which turns a simple bolt problem into a socket replacement too.
Welded joint failure on metal gates
A cracked or failed weld at a metal gate's frame corner is usually a fatigue failure from repeated flexing rather than a one-off impact, particularly on a gate that's been slightly out of square for some time before the weld gave way.
Re-welding without first correcting the underlying rack or misalignment tends to fail again at the same point.
Hinge types found on garden gates
Band-and-gudgeon hinges, tee hinges, plain butt hinges and adjustable bolt-on hinges each suit a different gate weight and post material, and fitting the wrong type for the gate's weight is a common cause of early hinge failure.
A heavy timber gate needs a band-and-gudgeon or heavy-duty tee hinge rather than a light butt hinge sized for an internal door.
Mesh infill security gates
A mesh security gate uses a welded steel mesh panel within a frame rather than solid boarding, giving visibility through the gate while still resisting climbing, and the mesh-to-frame weld or clip fixing is the usual point of failure rather than the frame itself.
A mesh panel that's come loose from its frame at one corner will often rattle before it fully detaches, which is worth catching early.
House numbering and signage fixed to gates
A house number, nameplate or intercom panel is sometimes fixed directly to a gate rather than a post or wall, and this needs planning into the gate's design so the fixing doesn't interfere with the frame's structural members or the gate's swing clearance.
Retrofitting signage to an existing gate should avoid fixing through a stile or rail in a way that weakens it, favouring surface-mounted brackets instead where possible.
Stainless fixings near a road
Fixings on a gate close to a public road pick up more airborne grit, salt spray in winter and general moisture than one set back in a garden, which accelerates corrosion on standard galvanised screws and bolts.
Stainless steel fixings cost more but resist this environment noticeably better, and are worth specifying on any roadside gate repair.
Frequently asked
What causes frame rot on a gate?
The bottom rail and hinge stile trap moisture longest and rot first — repairs there sometimes need improved drainage as well as new timber. Wightman Road, West Green Road Finsbury Park (north edge) Turnpike Lane and Wood Green form the borough's main retail centres.
Do I need a bigger post for a heavy gate?
Yes — the hanging post has to be sized to the gate's actual weight and length, not matched to the smaller posts used along the rest of the fence line.
Can ground movement affect a gate that used to work fine?
Yes — clay shrinkage or waterlogging around the hinge post is a common cause of a gate that suddenly starts sticking or dropping. Haringey falls under Haringey Council, in the N4 postcode area, neighbouring islington.
What is a self-closing gate hinge and does it need maintenance?
A spring-loaded or hydraulic hinge that returns the gate to closed automatically; it needs occasional tension adjustment as it wears.
Can tree roots affect a gate's swing?
Yes — root growth near a gate post can lift it slightly, throwing off the swing even when hinges and gate face are otherwise sound.
Do you fit or repair automated gates?
We handle the timber or metal gate itself; motor, control-board and sensor faults on automated gates are referred to a specialist automation engineer.
Can a sagging gate be fixed without replacing the whole frame?
Often yes, particularly if the sag is from a loose hinge fixing or a mis-directed brace rather than rotten timber — those causes can usually be corrected in place.
Why does a gate gap matter for child safety?
A gap between a closing gate and its post or an adjacent leaf can trap fingers, particularly at a height a young child would reach.
The short version for Haringey: a mesh panel that's come loose from its frame at one corner will often rattle before it fully detaches, which is worth catching early. Ferme Park Road, Alexandra Park Road Alexandra Palace Haringey covers a wide area including the Harringay Ladder, a distinctive grid of Victorian terraced streets between Green Lanes and Wightman Road. Haringey covers a wide area including the Harringay Ladder, a distinctive grid of Victorian terraced streets between Green Lanes and Wightman Road.
Get My Free Quote — 24h Response
No callout fee · Free site visit · Friendly local team covering London & Hertfordshire.