Costs & pricing
Fence Painting Cost: What Sets the Price
Last updated
The short answer
Fence painting cost depends mainly on how much fence there is, how much preparation it needs and the coating you choose. Length and height set the area; cleaning, algae removal and re-fixing loose boards add time; preserver, stain and opaque paint cover differently; and painting both sides, gates and awkward access all add to the job. We price from photos and rough measurements.
At a glance
- Size
- Length and height of the fence
- Preparation
- Brushing down, algae removal, re-fixing loose boards
- Coating
- Preserver, stain or opaque paint
- Extras
- Neighbour's side (with agreement), gates, protecting paving and plants
Most of the work in painting a fence happens before the first coat. Preparation, the product and access decide the price more than the tin does.
Fence painting looks like a simple job, so the spread between quotes can be surprising. The difference usually lies in what is included: whether the fence is cleaned and repaired first, how many coats are allowed for, and how carefully paving, plants and next door's side are protected.
We paint, stain and treat fences and gates as part of our maintenance work and after new fences are installed, across London and Hertfordshire. We do not publish a price per metre, because the same length of fence can be a very different job depending on its condition. This guide explains what moves the cost.

The size and style of the fence
The area to be coated is the starting point: the length of each run multiplied by its height. Style matters as well. A slatted, picket or trellis-topped fence has far more edges and gaps to work around than a flat panel of the same size, so it takes longer to coat evenly.
Condition and preparation
A finish lasts only as long as the surface beneath it. An older fence needs brushing down to lift dirt, loose fibres and flaking coating, and any green algae has to be cleaned off before anything is applied. Loose boards are fixed back and rotten timber is pointed out, since coating a board that is about to fail wastes the product. A neglected fence needs much more of this work, and preparation is often the biggest variable in the price.
Preserver, stain or paint
Each coating does a different job, and that affects how long the work takes.
| Coating | What it does | Effect on the job |
|---|---|---|
| Preserver | Protects the timber with a natural look | Usually the simplest to apply evenly |
| Stain | Adds colour while the grain still shows | May need more than one coat for an even colour |
| Opaque paint | A solid colour that hides the grain | Covering a dark finish with a light colour takes more coats |
One side or both
We coat your side of the fence as standard. The other side faces your neighbour's garden, so it is only coated if they agree and we can get access. Coating both sides doubles the area, and it is worth agreeing the colour with your neighbour before choosing something strong.

Gates, access and protection
Gates take longer than the same area of fence because hinges, latches and bolts are masked or removed so they still work afterwards. Tight side returns, borders planted right up to the fence and climbers growing through it all slow the work, and nearby paving, walls, plants and cars need protecting from drips.
Repairs found during preparation
Preparation sometimes shows up problems hidden under the old finish, such as a soft board, a split rail or a post moving at ground level. We point these out before coating rather than painting over them, and price any repair separately so you can decide. Our guide to what to expect from a fence repair explains how those smaller jobs are handled.
New fences and timing
New pressure-treated timber is often still wet from treatment, so it is usually better to let a new fence weather for a while before painting or staining it. The coating also needs dry weather to go on, so the forecast affects when the job can be done.
How to get an accurate price
Send photos of the fence from both ends, rough lengths and heights, the finish you want and whether the neighbour's side is included. We send a written estimate, then visit to confirm before work starts.
Want this priced properly for your garden?
Photos first, then a written estimate across London and Hertfordshire, a written specification, and a fixed price. No obligation.
Frequently asked
Is it cheaper to stain or paint a fence?
It depends on the fence and how much the colour changes. A preserver or stain close to the existing colour is usually less work than covering a dark finish with a light opaque paint, which can need more coats.
Does a fence painting price include cleaning first?
Ask for it to be stated. We include brushing down and cleaning off algae where it is needed, because the coating will not last without it.
Will you paint my neighbour's side of the fence?
Only with their agreement and access. As standard we coat your side.
How often will my fence need repainting?
That depends on the product, the timber and how exposed the run is. Sunny runs fade sooner and damp, shaded ones grow algae sooner, so recoat when the fence starts to look dry or patchy.
Do you treat gates as well as fences?
Yes. Timber gates benefit from regular coating because they move more than a fence and their end grain is exposed. Galvanised and powder coated metal gates do not need painting in the same way.
Can you paint a fence you did not install?
Yes. We paint, stain and treat existing fences and gates, and point out any boards or posts that should be repaired first.
